Hi Team,
Just want to check if below power up sequence is OK or not.
Vbias ramp up first , then add EN signal, then Vin ramp up.
BRs
Given
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
Just want to check if below power up sequence is OK or not.
Vbias ramp up first , then add EN signal, then Vin ramp up.
BRs
Given
Hi Given,
This power up sequence will work but since the device is enabled before vin is high, the soft start timing will be affected. Apart from this concern, the power up sequence is acceptable.
Thanks,
Shreays