Hi, BQ24800 support team,
In notebook PC application, EC is disabled the charging mode by writing Charge Voltage=0 and Charge Current=0 when gas gauge in battery pack is identified the Fully Charged. At least, the converter is disabled. I think the time until the converter as boost mode is restarted takes for a long period.
Is the Hybrid Power mode available in no charging mode?
The condition ;
- Adapter is plugged
- Battery Pack = Fully Charged(FC bit=1)
- Charge Voltage=0 Charge Current=0
- Watchdog timer is not expired
- Charge Option3(0x37) bit 2=1(Hybrid Power Boost Mode=Enable)