FUSION_DIGITAL_POWER_DESIGNER: 7.6.1 - Pins Info Error

Trenton Reed

Part Number: FUSION_DIGITAL_POWER_DESIGNER

Hi Team,

I updated to the latest Fusion version 7.6.1 this morning and now I receive an error when trying to export pins info. The tested device I used was UCD90320. Can you advise how to resolve this error?

over 2 years ago

0 yihe over 2 years ago

TI__Guru 58090 points

Hello

Thank you for reporting this issue and we had reproduced this issue. Team will work on this.

Before we release the fix, You can download old working GUI from below link

http://software-dl.ti.com/analog/analog_public_sw/fusion/TI-Fusion-Digital-Power-Designer-7.4.1.exe

Regards

Yihe

0 Trenton Reed over 2 years ago in reply to yihe

TI__Intellectual 2825 points

Ok, thank you. Please let me know when the release gets fixed.

0 yihe over 2 years ago in reply to Trenton Reed

TI__Guru 58090 points

Hello

This issue seems to be related to the changes from Microsoft. It may take extra times to have it solved. But we will update you as soon as the release is out.

Regards

Yihe

Power management

Power management forum

FUSION_DIGITAL_POWER_DESIGNER: 7.6.1 - Pins Info Error