This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS7B67-Q1: TPS7B6701 replaced with TPS7B6750 in the circuit

Part Number: TPS7B67-Q1

Hello Guys,

Good day.

Our customer wanted some flexibility in their design and wanted the ability to install either the TPS7B6701 or TPS7B6750 without having to worry about populating/depopulating any other parts at the same time. Since the adjustable version requires feedback resistor connected to pin 5(NC) to set the output voltage,  If he leave these resistors populated on the board, but install the 5V fixed output part, will that disrupt the operation of the regulator in any way?

Thanks and regards,

Art