To TI's team,
Sorry for bother, I have a question concerning watchdog on lp87702-Q1.
First, I wrote 0x01(even 0x02) on register 1Ch bit WD_RESET_CNTR_SEL. I read
current watchdog reset counter which was on register 1Eh bit WD_RESET_
CNTR_STATUS and found the the counter was 1. I wrote 0x01 on bit WD_CLR_
RESET_CNTR to clear the counter. However, the counter was not clear. Therefore, I
wrote 0x03 on register 1Ch bit WD_RESET_CNTR_SEL and did the same steps above.
The counter was clear, did I misused or there was something wrong?