• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 129 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCC2897A: PMP9126 Active Clamp Reset FET

Michael Balourdas
Expert 4745 points
Part Number: UCC2897A
Other Parts Discussed in Thread: PMP8923, PMP9126

Hello,

The FET called out for the Active Clamp reset on PMP9126 is no longer available: IRF6216TRPBF. I'm looking at substituting FDMC2523P from PMP8923. This part has Higher Rdson, but I'm not sure if that's much of a concern here. Otherwise, could you recommend a different part?

Thanks,

Michael

  • 0
    TI__Mastermind 47655 points

    Hi,

    You may contact the vendor to ask what is the best substitute or replacement - vendors should have recommendation for their customers how to deal with a situation of obsolete a product. If using FDMC2523P, you need to do some test to verify, it should be ok but you need to test to confirm.