Texas Instruments (TI) Power management support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search power management IC content or ask technical support questions on everything from linear and DC/DC switching regulators to battery management and LED drivers. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Part Number: TPS6594-Q1 Other Parts Discussed in Thread: TDA4VM , , DRA829
Hi Team,
Can you please check and advise with following request?
"
We have a design that uses TI's TDA4VM processor.
In TI's reference design, both PTPS659413F0RWERQ1…
Part Number: TPS548A28 At what EN voltage does the TPS548A28 start up?
Once the EN pin has a voltage of about 0.7V, the VCC LDO turns on. Once EN reaches 1.1V, the TPS548A28 begins switching. By slowly increasing the voltage of the EN pin, these voltage…
Lead-times and available finished good inventory vary by device and change over time, but we are dedicated to providing quick and easy access to all our devices via TI.com.
To help provide more transparency into TI’s available inventory, in late 2020…
Part Number: LP5860
Dear users,
Here is one draft version GUI for 11 x 18 matrix LED driver LP5860 evaluation module that you can use it to evaluate all features for LP586x family quickly. All functions are available in this version now. The link…
Part Number: LM3630A
Hello Expert, I have questions for LM3630A. My customer is evaluating this device but they are facing flicker issue with this. At this moment, they haven't figured out the root cause of this issue and it is just possibility that…
Part Number: TPS548A28 How stable is the output voltage of the TPS548A28 when the input voltage is 3.3V and the output voltage is between 0.6V and 2.5V?
The stability of the output voltage of the TPS548A28 is relatively constant between 0.6V and 2.5V…
