Texas Instruments (TI) Power management support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search power management IC content or ask technical support questions on everything from linear and DC/DC switching regulators to battery management and LED drivers. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] BQ25611D: Why do I have to read the fault status twice to see the cleared fault on BQ2561x?

    Part Number: BQ25611D Other Parts Discussed in Thread: BQ25619 , BQ25618 , Tool/software: When a fault occurs on BQ2561x an /INT pulse is sent to the host. For the BQ25611D, BQ25618/E, and BQ25619/E the fault status in REG0x09[7:0]/REG0x0A[6:4] are…

  • [FAQ] BQ25611D: What is ship mode and how do I enter and exit it in BQ2561x?

    Part Number: BQ25611D Other Parts Discussed in Thread: BQ25619 , BQ25618 , Tool/software: The BQ2561x has a mode to minimize quiescent current for the BQ25611D, BQ25618/E, and BQ25619/E from the battery in cases when the system load is not needed to be…

  • [FAQ] BQ25611D: How do I set the temperature range I desire using the TS pin on BQ2561x?

    Part Number: BQ25611D Tool/software: The BQ2561x TS pin is used to monitor the battery temperature via a thermistor with a pull-up and pull-down resistor. As the two resistors represent two unknowns when designing the TS circuit, only two temperature…

  • [FAQ] TPS923651: How to design the CSP and CSN pin components for TPS923651 / 0

    Part Number: TPS923651 Tool/software: How to design the CSP and CSN pin components for TPS923651 / 0?

  • [FAQ] TPS922051: How to design the CSP and CSN pin components for TPS922051 / 0

    Part Number: TPS922051 Tool/software: How to design the CSP and CSN pin components for TPS922051 / 0?

  • [FAQ] BQ24800EVM: Why is my battery quiescent current higher than expected?

    Part Number: BQ24800EVM Other Parts Discussed in Thread: BQ24800 Tool/software: The quiescent current stated on the BQ24800 data sheet applies only to the IC itself and not the EVM. Other components on the EVM board can also draw small amounts of…

  • [FAQ] TPS923651: What is the LED current that TPS923651 can support with Boost configuration?

    Part Number: TPS923651 Other Parts Discussed in Thread: TPS922051 , TPS923650 Tool/software: When TPS923651/0 is configured as Boost configuration, what is the LED current that it can support?

  • [FAQ] TPS923651: List of FAQs for TPS923651 / TPS923650

    Part Number: TPS923651 Other Parts Discussed in Thread: TPS923650 Tool/software: This thread provides a list of frequently asked questions for TPS923651 / TPS923650 LED driver. You can click below link to check the detailed answer for each question…

  • [FAQ] TPS922051: List of FAQs for TPS922051 / TPS922050

    Part Number: TPS922051 Other Parts Discussed in Thread: TPS922050 Tool/software: This thread provides a list of frequently asked questions for TPS922051 / TPS922050 LED driver. You can click below link to check the detailed answer for each question.

  • [FAQ] TPS25947: How to achieve 3 channel Priority PMUX using TPS25947

    Part Number: TPS25947 Tool/software: Extending the datasheet section 9.5 Priority Power MUXing for three input voltage rails.

View FAQ threads