This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

110/220 VAC to 12 KVDC Push Pull supply?

Prodigy 20 points

Replies: 2

Views: 2793

Any suggestions for the best Driver IC to use for this?

And/Or a possible Schematic.

Prefer operation frequency between 100Khz  to 1Mhz.

I can easily make this HV Ferrite core Transformer for this.

  • Gary,

    Most any of our power controllers with dual output capability will provide the control. See attached document starting at page 50 with the dual output controllers on page 53 and 54 and choose what features you want.

    Regards,

    John

    John Bottrill

    2013 Power Management Guide.pdf
  • In reply to John Bottrill:

    Hi John, THANKS FOR THAT INFO.

    Gary Lecomte

     

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.