Trouble is in the corresponding for TPS40170.
Please let me know about two point below of TP40170.
※Vin： 24V, Vout： 12V, Iout： 7.3A
High side FET： CSD18503Q5A, Low side FET： CSD18531Q5A
-----------------------------------------------------------------------------------
①Attached waveform is High-side and Low-side FET switching.
I feel that dead time is narrow.
Is there way to expand deadtime for change external component?
(Customer is not want to change FET)
※Brown： Vin, Green： Low Gate, Blue： SW, Red： High Gate
②About TPS40170EVM-597, Low side FET's Gate is connect 1000pF capacitor(C20).
Is C20 capacitor have what effect?
I think that C20 part is increase Gate capacitance for Low-side FET, is it correct?
（Increase Gate capacitance ⇒ expand deadtime）
-----------------------------------------------------------------------------------
Best regards,
Satoshi