• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 60 subscribers
  • Views 535 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS65100: Setup VCOM buffer

Brigitte
Guru 58215 points
Part Number: TPS65100

How to get the correct output voltage on VCOM. The datasheet does not describe in detail how this works.

  • 0
    TI__Guru 58215 points

    The VCOM buffer or TPS65100 is set e.g. via a resistor divider connected to VCOMIN. The output signal is a mirror of the input signal with more drive capability.

    If a digital input shall be used to generate the VCOM voltage, please check this app note:

    Best regards,
    Brigitte