EV2300: Communicating with EV2300 using dot net (C#)

Ian Slack

Prodigy 125 points

Part Number: EV2300

I am trying to write an application that can use the EV2300 to communicate with BQ chips to monitor SOC etc

some of the BQ chips are not supported on EV2300 / EV2400 e.g. BQ2060A

Is there any sample code to be able to get communication going with the EV2300?

Thanks in advance

Ian

over 7 years ago

0 Bryan Kahler over 7 years ago

TI__Mastermind 25955 points

Hi Ian,

The BQ2060A EVM utilizes the EV2200 ( store.ti.com/EV2200-EV2200-PC-Interface-Board-Battery-Fuel-Gas-Gauge-IC-P123.aspx ) as an intermediary for communication.

Older EVSW for SBS 1.1 gauges may allow you to read the standard SBS registers with the EV 2300 ( www.ti.com/.../sluc516 )

For rolling your own solution with the EV2300, here is the customer kit ( e2e.ti.com/.../EV2300-Customer-Kit.zip ). The library would need to be wrapped with C#.

Unfortunately, we do not offer support for the library above, but hopefully it will help get the ball rolling.

Sincerely,
Bryan Kahler

Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

Power management

Power management forum

EV2300: Communicating with EV2300 using dot net (C#)