This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: CSD19532KTT
I am trying to test the Rds on for this part# CSD19532KTT.
Setting Vgs=6V (DC). I am forcing 200mA to drain and measuring the voltage. Using the formula "Measured voltage/Force current" I can calculate the Rds(On).
The below circuit is used for testing this. Can you confirm this procedure is correct else please guide me with correct one.
Product Marketing Engineer
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Brett Barr1:
Thanks for your replay. I am yet to test this. If a known voltage is applied to drain to source in above setup, the Id current will be very high since the Rds is very low. I think in that case, the above setup wont work. Can you please share test setup details for voltage force and measure current.
In reply to ANURAJ NK:
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.