• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 62 subscribers
  • Views 377 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS7A80: long soft start implementation

Vincenzo Pizzolante
Mastermind 22746 points
Part Number: TPS7A80
Other Parts Discussed in Thread: TPS7A90

hi,

we need to set an extremely large SS time w/ TPS7A80.

we estimated something like 3.3 / 4.7uF as CNR.

do you see any drawback in terms of stability?

thansk a lot in advance

KR

Vincenzo

  • 0
    TI__Guru 55940 points
    Hi Vincenzo,

    There should not be an issue with stability by placing a large Cnr capacitor; however, due to the quickstart functionality of TPS7A80 you will note two distinct ramp rates on your output. For the first 2 ms, you will see a faster ramp rate while the quickstart switch is closed.

    If you would like a more linear startup, please consider TPS7A90.

    Very Respectfully,
    Ryan