This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

FUSION_MFR_GUI: FUSION Header pin out

Prodigy 40 points

Replies: 3

Views: 211

Part Number: FUSION_MFR_GUI

What is the definition of the 10 pins on the connector at the end of the ribbon cable of the Fusion USB Interface Adapter?  I have several PMBus bucks (TI parts) on a design and need to be able to

connect to the software and talk to bucks on design.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.