BQ501210: BQ501210's PMOD/FOD calibration issue

Alan Hung

Prodigy 15 points

Part Number: BQ501210

Hi ,

We have a wireless charging product using bq501210!

BQ501210's PMOD/FOD calibration issue.

Can you tell me how to calibration the pmod / fod function(threshold resistance)?
Are there adjustment steps or tools?

thanks!

Alan

over 5 years ago

0 Bill Johns over 5 years ago

TI__Guru 65716 points

PMOD is not required, will only apply to WPC 1.0 RX that TI built all are off the market now.
Regarding FOD this is complicated if you are looking for full Qi certification to 15W.

I will contact you.

0 Bill Johns over 5 years ago in reply to Bill Johns

TI__Guru 65716 points

I will work with you off line on this question.

****Note that the BQ501210 is NRND and support for it is limited***

Power management

Power management forum

BQ501210: BQ501210's PMOD/FOD calibration issue