LM5160-Q1: Fly-Buck and Flyback Topology Selector

tateo yamashiro

Part Number: LM5160-Q1

Hi,

Our customer is considering using LM5160-Q1 in Fly-Buck-Boost topology. So they estimate external parts by Fly-buck and Flyback Topology Selector. But the cells part of compensation in sheet of Fly-buck-boost is protected and they can't use it. Could you provide unprotected version?

Best Regards,
tateo

over 5 years ago

0 Arief Hernadi over 5 years ago

TI__Mastermind 23815 points

Calculator_Rev1p03_Updated_9_21_18.xlsxHi Tateo,

Yes we are in the process updating it.

In the meantime you can use this one temporarily

Thanks

-Arief

0 tateo yamashiro over 5 years ago in reply to Arief Hernadi

Guru 10890 points

Hi, Thank you for your quick support. Let me confirm one thing. What does "worst case ripple" describe? Is this the output voltage ripple? If there is the recommended setting, could you provide it?

Best Regards,
tateo

0 Arief Hernadi over 5 years ago in reply to tateo yamashiro

TI__Mastermind 23815 points

Hi Tateo,

I believe this is for what is seen on the FB node.

Thanks
-Arief

Power management

Power management forum

LM5160-Q1: Fly-Buck and Flyback Topology Selector