• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 62 subscribers
  • Views 335 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ76925: bq76925

Mahesh Tambade
Prodigy 20 points
Part Number: BQ76925

we can measure cell voltage of cell using bq76925  with out using msp430

please tell the methods 

  • 0
    TI__Guru 54715 points
    Hi Mahesh,
    Yes, you can measure cell voltage without the MSP430, but a MCU is a common method in a circuit. The MSP430 is a good MCU of course but others can be used.
    If you are in a laboratory environment you could use a computer with I2C interface to send commands to the bq76925 to select the cell output, then measure with a voltmeter. Read and apply correction for the cell if desired.
    That is the basic operation required: Send commands to select the cell to be output, measure and convert the output, read and apply correction from the stored calibration if desired.