BQ24630: Does BQ24630 enter Sleep mode when VCC = SRN(during discharging) in any status ?

Xijun Fan

Part Number: BQ24630

When BQ24630 in fully charged status, a pulse dischage performed(1s duration), VCC will equal to SRP for 1S, Will BQ24630 enter sleep mode in the 1s discharge duration? Then recovery the charge power followed the pulse discharge, how will the charger process, will it start new charge cycle or keep previous charge status ?

over 5 years ago

0 Ning T over 5 years ago

TI__Mastermind 46551 points

Hi,

Are you referring to the pulse discharge during the battery detection?

Thanks!

0 Xijun Fan over 5 years ago in reply to Ning T

Prodigy 80 points

No, it's the application that the system running with AC power, then remove input power for 1s(battery will switch to input immediately) then re-connect the input power, I want to know the charger behavier after that. Thanks!

0 Ning T over 5 years ago in reply to Xijun Fan

TI__Mastermind 46551 points

Hi,

When the input power is re-connected, the device behaves the same as the input power was plugged in the first time.

Thanks!
Please click "This Resolved my issue" button if this post answer your question.

Power management

Power management forum

BQ24630: Does BQ24630 enter Sleep mode when VCC = SRN(during discharging) in any status ?