LM9036: Minimum output current value

Yoann LELIEVRE

Part Number: LM9036

Hello TI team,

I just wanted to know if this LDO regulator has a minimum output current value required to ensure stability and the correct working of regulation?

Thank you in advance for your support.

Best regards,

Yoann

over 6 years ago

0 Ryan Eslinger over 6 years ago

TI__Guru 55940 points

Hi Yoann,

LM9036 was designed, tested, and characterized for a minimum load current of 0.1 mA. Stability with a lower output current may be achieved; however, as it is outside of the tested and characterized region you may or may not achieve the performance depicted in the datasheet. We recommend a minimum load current of 0.1 mA.

Very Respectfully,
Ryan

0 Yoann LELIEVRE over 6 years ago in reply to Ryan Eslinger

Prodigy 20 points

Hello Ryan,

Thank you very much for your prompt response. I will take into consideration this recommendation in my design.

Best regards,
Yoann

Power management

Power management forum

LM9036: Minimum output current value