• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 63 subscribers
  • Views 180 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LP87524B-Q1: LP87524B-Q1 CLKIN pin define

Eric Chen4
Expert 2370 points
Part Number: LP87524B-Q1

Hi,

May I know how to design LP87524B-Q1 CLKIN pin?

I check TI DEP-0092 reference design and find the CLKIN pin is NG.

But Spec show "Connect to ground if external clock is not used" on page 4.

Please kinldy confirm it again.

Thanks.

Regards,

Eric

  • 0
    TI__Genius 17380 points
    Hi Eric,

    I have assigned this to the device expert to confirm. As a general rule we recommend following the datasheet first, reference design second; but we will double confirm for you.

    Thank you for pointing out this potential oversight in DEP-0092, we will work with them based on the resolution above.
  • 0
    TI__Genius 11020 points

    Hello Eric,

    Either way is ok. CLKIN has OTP configurable internal pull-down resistor (CLKIN_PD bit) and in LP87524B it is activated. It means you can leave the CLKIN floating if not used.

    Thanks.

    Regards,

    Tomi Koskela