This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TPS54340B-Q1
Our customer uses TPS54340-Q1 and TPS54360-Q1, and these PNs are NRND.
I promote TPS54340B-Q1 and TPS54360B-Q1, there is an issue about the design:
Is there any difference between TPS54340-Q1(TPS54360-Q1) and TPS54340B-Q1 (TPS54360B-Q1)?
Thanks a lot!
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to David Baba:
In reply to Robert Blattner:
I sent email and no feedback.
I only want to know can customer use TPS54340B-Q1(TPS54360B-Q1) to replaceTPS54340-Q1 (TPS54360-Q1) directly in the designs？
And the customer’s design as follows:
Pls. give some advice about it.
In reply to Lian Wu:
Yes they can use TPS54360B-Q1 and replace TPS54360-Q1 as the B version is dop in replacement of the part . Here is the communication slide you can send to your cusotmer regarding the changes in B version .
Ambreesh Differences between TPS54K B and non-B versions - For customer communica....pdf
In reply to Ambreesh Tripathi:
The TPS54340B-Q1 is a drop in replacement for the TPS54340-Q1. If a design works with a TPS54340-Q1, it will work with a TPS54340B-Q1. No change to either the PCB or the BOM will be needed.
I meant Drop in and not dop :) ---Ambreesh
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.