Hi all,
My customer is trying to implement thermal foldback via analog dimming on the ICTRL pins. Is it possible to connect both ICTRLx pins to the same resistor divider, or must they be separated?
Thank you,
Jon
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi all,
My customer is trying to implement thermal foldback via analog dimming on the ICTRL pins. Is it possible to connect both ICTRLx pins to the same resistor divider, or must they be separated?
Thank you,
Jon
Recommend to use seprate circuit to avoild any influence between two channels.