BQ25600D: charger IC FW setting

joseph chen6

Prodigy 90 points

Part Number: BQ25600D

Hi,

charger IC , BQ2500D is using I2C I/F

can it set charger with a suspend mode , that no draw any current from USB input side ?

any document about the FW setting ?

thanks.

joseph.

over 5 years ago

0 joseph chen6 over 5 years ago

Prodigy 90 points

Hi,
i have found it in datasheet , table 7 REG00 Field Descriptions
HIZ mode

however , i have another question
if connect to apple device (I-phone) , can BQ25600D recognize it ?
thanks.

joseph.

0 Angelo Zhang87 over 5 years ago in reply to joseph chen6

TI__Genius 11850 points

Hi Joseph,

The BQ25600D can detect an Apple adapter using the D+/D- pins and set the correct input current limit. Please see Section 8.3.3.3.1 in the datasheet for more details.

Best regards,
Angelo

Power management

Power management forum

BQ25600D: charger IC FW setting