Hi TI-team
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi TI-team
Hi Frank-san
Thank you for response.
When the EN voltage is higher than VIN, does it mean that current flows into the EN pin ?
For example, EN is 5V and VIN voltage drops and UVLO is detected.
Best Regards,
Koji Hayashi
Yes the current would flow into EN when EN is greater than Vin.
This current should be limited by an external resistor if this case is possible.
Hi Frank-san
Thank you for response.
I understand.