TPS7B82-Q1: Change the output voltage from 3.3V to 5V

Rajasekaran

Intellectual 945 points

Part Number: TPS7B82-Q1

Dear sir,

we are having 15V input voltage and by default we are getting 3.3V as output voltage.

How to change the output voltage to 5V? Kindly guide us to change the output voltage.

Thanks & regards,

Rajasekaran.

over 4 years ago

0 Ryan Eslinger over 4 years ago

TI__Guru 55940 points

Hi Rajasekaran,

TPS7B82-Q1 is a fixed voltage family of regulators. As such, 5 V devices and 3.3 V devices have different orderable device numbers. Could you confirm the orderable device number that you purchased?

Very Respectfully,

Ryan

0 Ryan Eslinger over 4 years ago in reply to Ryan Eslinger

TI__Guru 55940 points

Hi Rajasekaran,

Since it has been a week without a reply, I assume that this thread is resolved. If this is not correct, please feel free to post again.

Very Respectfully,
Ryan

0 Rajasekaran over 4 years ago in reply to Ryan Eslinger

Intellectual 945 points

Dear sir,

Initially we tested with simulation and got 3.3V as output. We ordered correct part number to get 5V output.

Thanking you.

Thanks & regards,

Rajasekaran.

0 Jason Song over 4 years ago in reply to Rajasekaran

TI__Mastermind 23361 points

Thanks for the confirmation. We are glad the problem has now been solved.

Jason

Power management

Power management forum

TPS7B82-Q1: Change the output voltage from 3.3V to 5V