This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

TPS65218EVM-100: TPS65218 GUI Not working

Prodigy 50 points

Replies: 2

Views: 101

Part Number: TPS65218EVM-100

I have one TPS65218EVM, USB2ANY and i installed the TPS65218 GUI software from the below link. I have connected and give 5V, 3V power as said in datasheet.I am not able to monitor the registers of the TPS65218 IC in the EVM. I did not getting any values in the GUI. What steps i followed after the installation of GUI.

www.ti.com/.../TPS65218EVM-100

  • Deljo,

    It sounds like you used the Legacy software, which is compatible with the USB-TO-GPIO adapter.

    If you have a USB2ANY adapter, you can use the newer IPG-UI software.

    Thanks & Best Regards,

    Brian

    Find the right power solution for your processor or FPGA. Visit  www.ti.com/SoCPower today!

  • In reply to Brian Berner:

    Thanks Brian, Its working

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.