• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 208 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM5170-Q1: LM5170 as charger

Eric Hsu34
Prodigy 310 points
Part Number: LM5170-Q1
Other Parts Discussed in Thread: LM5170, TIDA-01168

Hi Team

My customer has question for LM5170 as charger, but requires SW to do this.

Do we have any related document as below?

thank you

1.Programming Guide.

2.Bring-up Initial code.

3.Application Notes for supporting SW bring-up

  • 0
    TI__Mastermind 21720 points

    Hi Eric,

    Thanks for reaching out with your questions.

    There is not a software manual for the LM5170 as it is an analog IC. However there is a reference design TIDA-01168 that uses an MCU to control the voltage loop. This might be a good starting point.

    If you have questions please contact me directly.

    Thanks,

    Garrett