This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

UC3843A: PWM Generation

Prodigy 10 points

Replies: 1

Views: 34

Part Number: UC3843A

Hello,

Can you  help me with the schematic and technical help for generation of PWM signals using UC3843A

JAYADEVAN J V

  • Hello Jayadevan,

    The Applications and Implementation section of the datasheet is a guide to the majority of power stage components. Also, may I recommend using the Power stage designer tool attached below to simulate the system behavior in a flyback topology with your choice of components.

    http://www.ti.com/tool/POWERSTAGE-DESIGNER

    This tool is very interactive and you can click on the component symbols to check the current and voltage waveforms over the whole line and load conditions.

    Another tool is the Webench Modeling tool that can be extremely helpful in your design process.

    http://www.ti.com/design-resources/design-tools-simulation/webench-power-designer.html

    In addition to these tools, I can help review your design once done, to ensure that design specifications are met.

    Regards,

    Sonal

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.