This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

LM1085: LM350A

Intellectual 590 points

Replies: 3

Views: 88

Part Number: LM1085

全頁相片1.pdf

  • Hi TI Team

    I'm Andy.

    I'd like to know how to design a circuit to control the LDO(LM1085 or LM350A).

    Is there any article I can refer to?

    Thanks 

  • In reply to Chun Hung Chen:

    HI Andy,

    Can you clarify what you are trying to do> Since you are using the LM1085 or LM350A, it looks like you are trying to support a high load current. What is the input/ouput voltage range you would like to support and what is the nominal and peak load currents for your application?

    If you are trying to support more than 3A, we have the following TI-Design (TIDA-10232) which shows how to do this with a lower voltage and newer device.

    Please let me know.

    Regards,

    John Cummings 蔣康明
    Texas Instruments 德洲儀器
    Johncummings@ti.com

    Please click the "Resolved" link at the bottom of this post if I have answered your question.

    Thank you,

  • In reply to JCHK:

    Hi Andy, 

    Since it has been a week without a reply, we assume that this issue has been resolved.  If this is not the case, please feel free to reply.

    Regards, 
    Jason Song

    Please click the "Resolved" link at the bottom of this post if I have answered your question.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.