This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

TPS546D24: TPS546D24

Prodigy 10 points

Replies: 1

Views: 151

Part Number: TPS546D24

questions about using TPS546D24 and full datasheet of this

hi dears
i havve usung TPS546D24 as stackable 4 chip for 160 A output. but there is many questions about this chip:
1. there is little dates about PMBus threshold voltage and ho to configure it. for example, in tps544 our threshold voltage is 1.8 volt by default and we can configure it to other voltage like 3.3 volts and 5 volts, by changing PMB_HI_LO register.but i don't find this configuration in TPS546D24 datasheet. how can it communicate with a 1.8 volt microcontroller?
2. why i can not fined full datasheet of this product? can you send full datasheet of this?
3. how can i configure physical address in this chip for more than one chip in PMBus? there is no information about resistor divider for physical address for TPS546D24?

 

  • Hosien,

    TPS546D24 is not fully released.  Please contact me directly at j(dash)tucker(at)ti(dot)com and I will forward your contact info to a support person.

    Best  Regards,

    John Tucker

    BSR-MV DC/DC Applications

     

    “Working on an automotive power design? Read the E2E technical article Meet European Commission ADAS requirements with TI DC/DC for device recommendations and other helpful resources.”

     

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.