This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
LM385-ADJ model problems
Part Number: LM385-ADJ
Dear TI Staff
I downloaded LM385-ADJ spice model from your website, I simulate on LTspice and follow the circuit as I attached. I found that it is not working. But when I swap R2 and R3 the result is correct.
Which one I should trust between datasheet or this spice model? If the spice model is wrong could you provide the correct one?
Datasheet link -->http://www.ti.com/lit/gpn/lm385-adj--
Spice model link -->www.ti.com/.../snvmb82<--
Circuit picture below
The datasheet should be correct. I have ordered some devices of this flavor because I do not have them currently. I can try this
Is there a reason you want to use a LM385 vs a LM4041-ADJ or ATL431LI? I can confirm that both of those devices datasheet and models match.
If you feel your thread is resolved, please selected Answered.
Looking for the lowest noise voltage reference? Check out the new REF70 family of products starting with the REF7025 with 0.22 ppm p-p of noise.
Check out: Voltage Reference Design Tips For Data Converters a new app note that discusses voltage reference error and how it affects ADCs/DACs
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Marcoo Z:
Thank you for your following about my issue.
I got this design from the last project of my company, then I use this circuit to be a reference for my current project.
I will look forward to your checking.
In reply to Narukom Sakoonvilaikidcharoen1:
I requested samples of the LM385. They have arrived and I will verify the datasheet these coming days.
The device matched the datasheet. I need to look at why the spice model did not function the same way.
I will feel confident using the device schematic that you have posted.
Thank you for your help, so I can move forward with my project.
Also could I have this spice model of LM385 after you have the correct one?
In reply to Narukom Sakoonvilaikidcharoen:
I agree that the model is not working properly. I can look into correcting the model or removing the non functional model. A fixed revision will take a while so I would not count on it in the next coming month.
If you don't need the low Iq of the LM385, you can use a LM4041-N ADJ or TL431LI and those have both working models and a variety of package options.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.