Hi TI experts,
What's suggestion of bq2947 protector connect or setup procedure? I worry the wrong setup to cause OUT pin be high during cell1..2...3 connect.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
The first page of our datasheet includes a reference schematic. It can be found here:
http://www.ti.com/lit/ds/symlink/bq2947.pdf
If you have any specific questions, you can send me your schematic and I would be happy to review it.