This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

BQ78350-R1: DOD at EDV2

Prodigy 210 points

Replies: 1

Views: 80

Part Number: BQ78350-R1

Hi team

We use bq78350 without CEDV algorithm (CEDV Gauging Configuration = 0x0002).

Please let I know the relation range of DOD at EDV2.

Is there any process that refers to DOD at EDV2 other than the device estimates the initial capacity of a battery pack?

Best regards, 

Pls forgive my poor English.

Masa

1 Reply

  • Hi Masa,

    DOD at EDV2 is used for initial capacity estimation but it is also used when calculating the updated FCC at the end of a qualified cycle. It is also updated along with FCC. 

    Best regards,

    Matt

    Please click "This resolved my issue" button if this post answers your question

     TI provides design resources and design advice (including technical, schematic, code and/or system review) “as is” and with all faults.  All information in this or related correspondence is provided subject to TI’s Important Notice (http://www.ti.com/corp/docs/legal/important-notice.shtml).

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.