This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TLC77
Regarding the TLC7733IDR , the following is the circuit we designed. Is C173, C178, C177 required?In the case of R296 and C173, it should be for the design of the Push button, but in our design the input to the reset IC is pulled by the CPLD, so I think that the C173 is not needed
PLease check do you have other concern.
C173 and C178 are not needed for the /RESETIN pin and can be removed. C177 is also not needed and CONTROL can be tied directly to GND. I don't see any other issues.
Please let me know if you have any additional questions. Thanks
If you think this response answered your questions/concerns, please click the "Resolved" button to let us know!
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.