This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

TPS61099: Can TPS610995 can power up into a pre-biased load?

Intellectual 1050 points

Replies: 3

Views: 40

Part Number: TPS61099

Can TPS610995 can power up into a pre-biased load?

  • Hi Lauren:

    The TPS610995 could startup with bias output voltage. May I know the details condition of the load like the current and Vout?

    Besides, is there any situation that changing the Enable/Disable quickly?  

    Best Regards

    Minqiu

  • In reply to Minqiu Xie:

    1. Current is 100mA at 3.6V, sleep current needs to be lower than 50uA.

    2. Also, what is the OPN for the adjustable version in WSON packaging? I see in the datasheet that the adjustable output voltage and fixed output voltage version is available in both WCSP and WSON package, but on http://www.ti.com/product/TPS61099/samplebuyI only see TPS610995DRVR and TPS610995DRVT available as WSON package. Are these both adjustable?

    Thanks,

    Lauren

  • In reply to Lauren Mayfield:

    Hi Lauren:

    Thanks for supplement. I'll contact you with email for the OPN

    Best Regards

    Minqiu

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.