This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

WEBENCH® Tools/BQ25101: current draw of charger chip when its connected but not charging

Expert 1290 points

Replies: 1

Views: 63

art Number: BQ25101

Tool/software: WEBENCH® Design Tools

please let me know which current should I use as the current draw of this charger chip when it's connected to battery but not charging (USB is not connected).

  • Guru 81965 points

    Hi Pragash,

    If there is no input power source and no other pins are pulled high, IOUT(PDWN) = 50nA is the current going back into the charger via the OUT pin.

    Regards,
    Jeff

    Please click "This resolved my issue" button if this post answers your question.

     

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.