This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ76PL536A: BQ76PL536A

Part Number: BQ76PL536A

On-board programming question below:

Page 27 of datasheet: Because the LDODx inputs are pulled briefly to approximately 7V........for pullups to 5-V digital pins, such as HSEL and SPI(bus)_H.....

If LDODx inputs were tied to battery whose voltage is larger than 7V, would such 7V still present on LDODx outputs during on-board programming?

Or we need other means or added circuits for on-board programming?