This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

LM5122-Q1: Clarification of Duty in datasheet

Prodigy 240 points

Replies: 1

Views: 56

Part Number: LM5122-Q1

Greetings,

I'm finding the use of Duty in the data sheet to be confusing and suspect there may be a data sheet error.

D' is defined on page 16 as D'=1-VIN/VOUT

D' is also defined on page 25 and in Note (3) on Page 28 as D'=VIN/VOUT

Other equation then use both D' and D but D is not defined anywhere.

Should Page 16  be D=1-VIN/VOUT and the implied relationship between D and D' be D' = 1-D?

Regards

David

  • Hi DEP,

    Thanks for reaching out with your question and for considering the LM5122 in your design.

    In equation 5 the term should be D not D'. The definitions should be as follows

    D = 1 - (ViINVOUT)

    D' = VIN/VOUT

    Thanks,

    Garrett

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.