Team,
1)I am looking at the below use case:
24VAC VIN -> 12VDC Vout
It seems that SCIN can be used as output. What would be the max current that could be sink from SCIN.
The idea would be to use an LDO on SCIN to get 12VDC and not use the LDO Output at all (LDO_IN/LDO_OUT).
-Is this possible?
-Is the calculation tool covering as well the 24 VAC VIN use case?
Are the Cs and Rs dimensioning calculation working accordingly?
2)Alternatively is the 24VAC VIN -> 5VDC / 120mA use case ok?
-Is the calculation tool covering this?
Thanks in advance,
A.