This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

BQ29200: BQ29200

Prodigy 20 points

Replies: 2

Views: 28

Part Number: BQ29200

Hi, 

Is it possbile to use 2xBQ29200 to balance 3 cell in series?? In such a case on of them would not be referenced to ground but to the voltage of one the cells. 

  • Hi Joan,

    Have you thought about using the BQ77915 (3-5 cell protector with balancing)?

    It is possible to stack BQ29200, but I am not sure how it would work with only one cell on one of the devices (it would not be able to balancing that cell).

    Best regards,

    Matt

    Please click "This resolved my issue" button if this post answers your question

     TI provides design resources and design advice (including technical, schematic, code and/or system review) “as is” and with all faults.  All information in this or related correspondence is provided subject to TI’s Important Notice (http://www.ti.com/corp/docs/legal/important-notice.shtml).

  • In reply to Matt Sunna:

    I was not aware of this device ( BQ77915). I think I will go for it. Thank you very much 

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.