Other Parts Discussed in Thread: BQ24190
Hi
I am using BQ24195 on my design but i don't use D+/- and OTG pins. Is it ok to connect them to the GND or do you have any other suggestion? I don't want to leave them floating.
Thanks in advance
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
Please visit https://e2e.ti.com/support/power-management/f/196/t/877725 for BQ2419X: Schematic Review and PCB Layout Design Tips and https://e2e.ti.com/support/power-management/f/196/t/875388 for BQ2419X/2429x FAQs. BQ24195 is similar to BQ24190.
It is ok to short D+/D- together, ground OTG pin.
Thanks,
Ning.