• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 224 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCC25600: Design of power supply wiith UCC25600

Dhananjay Deokar1
Prodigy 10 points
Part Number: UCC25600

Dear sir    

I have to design   power supply     as shown below  with 160 w  constant power  and with 200 w constant power  for voltage out put   7 KV to 2 KV   variable .pls guide me in designing and with feedback of voltage current and power . Thank you . and anticipating guidance .

Dhananjay Deokar

  • 0
    TI__Guru 65965 points

    We have received your inquiry and are looking into it.

    Regards, 

  • 0 in reply to Mike O'
    TI__Guru 65965 points

    Hello,

    This is a unique design and I have researched TI's application notes and reference designs.  I do not see anything that would help with an off line 7 kV 200 W output.  I also don't believe the UCC25600 is the correct device for this application.

    I searched the web to see where an offline design to 7 kV application might be.  I found a power supply for a Glass Neon Sign ballast. If this is your end application, I don't believe TI makes products directly for this application.

    Regards,