This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: UCC28019
I want to design a ACDC power. The input is: 220AC and the output is: +-15V/5A.
Could you please help recommend a reference design about this application?
The UCC28019 is a boost type pfc controller.
This means the output voltage is a DC value greater than the peak of the AC input.
With a 220Vac input you can only greater a DC value of about 220Vdc or greater.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to John Griffin1:
Could you please help recommend a reference design or application note about this request? (Input:220AC, output:+-15V/5A)
In reply to Kevin Xiong:
You can use the WEBENCH Designer tool for this.
Input you design requirements and select one of the reference designs that best meets your requirements.This will get you started on the process and enable you to pick the best design for your requirements.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.