• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 62 subscribers
  • Views 933 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

ISO5852S: Active Miller clamp

UCC5350-Q1: active miller clamp

Dongbao Zhou
Expert 3930 points
Part Number: UCC5350-Q1
Other Parts Discussed in Thread: ISO5452

Hi team,

Could you confirm the active miller clamp trigger conditions? I think it should be IN=L and Vclamp falls below Vclamp_th.

Could you also share the hysteresis spec of the internal miller clamp comparator? Like hysteresis width...

https://e2e.ti.com/support/power-management/f/196/t/778666?tisearch=e2e-sitesearch&keymatch=miller%25252520clamp

ISO5452 is described as higher than Vclampth to trigger the active miller clmap.

Thanks 

Dongbao