TPS63802: TPS63802: Is it possible to use 220nH inductor?

Michael Jeong1

Expert 2600 points

Part Number: TPS63802

Our customer want to use 220nH Inductor.

Is there no problem?

Another Question.

What's the possible range of min. & max. value for Inductor?

Pls let me know.

Best Regards,

Michael

0 Minqiu Xie over 3 years ago

Hi Michael:

We recommend the inductance value from 0.37uH-0.57uH

So I don't recommend 220nH.

0 Michael Jeong1 over 3 years ago in reply to Minqiu Xie

Expert 2600 points

Hi Minqiu,

Thanks a million.

Best Regards,

Michael

0 Michael Jeong1 over 3 years ago in reply to Michael Jeong1

Expert 2600 points

Hi Minqiu,

Could you have any replaceable part for this part which is possible 200nH?

I'm waiting for your reply.

Best Regards,

Michael

0 Minqiu Xie over 3 years ago in reply to Michael Jeong1

Hi Michael:

200nH is critical for our device. May I know why you prefer that?

I can help to check, but as far as I know, there is no device.

0 Minqiu Xie over 3 years ago in reply to Minqiu Xie

Hi Michael:

As long time no hear from you, I assume you have solved the issue. If not, just reply below. Thank you!

Power management forum