Hi,
in the datasheet we show that we have 400kohm pull down resistor from INA and INB to GND.
But I've measured the resistor with a multimeter, it's 8.2Mohm, not 400kohm.
Why?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
in the datasheet we show that we have 400kohm pull down resistor from INA and INB to GND.
But I've measured the resistor with a multimeter, it's 8.2Mohm, not 400kohm.
Why?