Part Number: UCC5310
I would like to use UCC53XX, but I need an ENABLE input. Do you have a part like UCC53XX with an ENABLE pin?
Gate Driver Applications
Dallas, TX USA
We have an excellent training series that can help answer all your questions about our gate drivers. It is indexed so you can jump right to the section you want! You can find it here. A second series focused 100% on Isolated Gate drivers may be found here.
We also provide models for our gate drivers to accelerate your time to market. You can find them in the Product Folders under the "Design and development" tab:
Tables 4 and 5 of the UCC53XX datasheets show that IN- may be used as an ENABLE pin. When IN- is driven high, the output is driven Low, regardless of the state of IN+. Simply drive your PWM input signal into IN+, and then connect your Enable signal (active high) to IN-.
If you have further questions about this topic, or any other topic, please post a new/related question and our team will be happy to help you.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.