Good day!
What is the channel configuration for PTPS659414F4RWERQ1? Does this chip replace PTPS659413F0RWERQ1 (taking into account the changes on the last sheet of PROC078E7B (001) _SCH.pdf)?
Yours faithfully
Shepetko Anatoly
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Good day!
What is the channel configuration for PTPS659414F4RWERQ1? Does this chip replace PTPS659413F0RWERQ1 (taking into account the changes on the last sheet of PROC078E7B (001) _SCH.pdf)?
Yours faithfully
Shepetko Anatoly
Hello,
This is described in the user guide. The channel configuration is 1+1+1+1. It does not replace the 413 device.
Regards,
Chris
Thank you for the prompt answer!
I'd like to ask an additional question...
If I am to mount the (part number) on the board, can it be reconfigured (after assembly) to work in accordance with requirements from (document)?
Hello,
The PTPS659414F4RWERQ1 will work according to the user guide. There is no need to reconfigure the device unless you have special considerations beyond what is described. Reconfiguration is done through the I2C interface.
Regards,
Chris