Please note that E2E has undergone a major upgrade. Before logging in, please clear ALL your browser's cache and cookies.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCC2808A-2: Power Dissipation Calculation

Guru 17645 points
Part Number: UCC2808A-2

Please let me know about how to calculate power dissipation for UCC2808A-2 or the other Push-Pull PWM. 

If there better that available application note or calculation tool. 

Best regards,

Satoshi

  • Hi Satoshi-san,

    Normally I measure the current flowing into the Vcc pin and use this in conjunction with the Vcc voltage to calculate the power dissipation in the device. Then I use the thea junction to ambient to calculate the junction temperature rise over the ambient.

    The power dissipation in the controller will depend on the frequency of operation and the capacitive load presented by the mosfets on the gate drive pins i.e. higher frequency with lower Rds on/high capacitance mosfets will increase the power dissipation within the controller.

    Regards

    Peter